  | 
    
    Dry Pro Waterproof  Cast Protector and Shower Bag
     | 
   
 
The Dry Pro 
™ Pro-Pump Waterproof Cast Cover
The Dry Pro is Completely Watertight Keeping your Bandages, 
Prosthesis, and Casts Dry.  
The Dry Pro Pro-Pump offers the only leg and arm cast protection in the 
world with the patented vacuum seal to keep your bandage or cast dry. It is so 
completely and totally waterproof, between the waterproof fabric and the vacuum 
seal, that you can even dive off a diving board or ride the ocean waves and 
still have your cast stay completely dry. The Dry Pro shower cast cover fits 
snugly yet comfortably offering cast protection during a shower, a bath, and 
even an active swim. Unlike "modified garbage bag" products, the cast protection 
offered by the Dry Pro shower cast cover is unmatched, it cannot slip off. You 
can't even pull it off! 
Allows Postoperative Hydrotherapy 
Dry Pro shower cast cover is also used for immediate postoperative physical 
therapy, allowing hydrotherapy right after surgery, which helps prevent swelling 
and stiffness and aids in a speedy recovery. 
A Reliable PICC Line Cover 
If you have PICC (Peripherally inserted central catheter) you know the area 
around where the PICC is inserted is prone to infection. You may find that using 
the Dry Pro as a PICC line cover when showering or swimming helps to keep 
bacteria and other contaminates away from the vein the PICC is inserted in. With 
a Dry Pro PICC line cover, you can keep the area around the vein completely dry 
whether you are in the shower or the ocean. 
Quick and Simple Prosthesis Protection 
If you have a prosthetic arm or leg you may find it quicker and simpler to 
use Dry Pro as a waterproof prosthetic cover than to remove your prosthesis. 
Also, with your lower extremity prosthesis in place, protected by the Dry Pro 
waterproof prosthetic cover, you may now be able to stand comfortably in the 
shower, a pool, or the ocean. 
The Dry Pro waterproof fabric is rugged.  
The waterproof fabric is made of durable high quality surgical latex. The 
special Non-Skid Grid™ protects the sole and helps prevent slipping. The 
Built-In Pump not only creates the vacuum seal but also works as a gauge showing 
that the vacuum is intact and cannot leak. 
  
Leg Cast Cover Sizes  
(The arm models have a different shape than the leg models)
  
  
    | 
    Leg Cast 
    Cover Style | 
    
    Model | 
    
    Length 
    in(cm)  | 
    
    Opening 
    in(cm)  | 
   
  
    | 
    X-Small | 
    FL-12 | 
    19 in (48 
    cm) | 
    7 in (18 
    cm)  | 
   
  
    | Small | 
    FL-14 | 
    29 in (73 
    cm) | 
    13 in (33 
    cm)  | 
   
  
    | Medium | 
    FL-16 | 
    32.5 in 
    (82 cm) | 
    15.75 in 
    (40 cm)  | 
   
  
    | Large | 
    FL-18 | 
    37 in (94 
    cm) | 
    19 in (48 
    cm)  | 
   
  
    | Small 
    Half Leg | 
    HL-13 | 
    21in 
    (53cm) | 
    9in 
    (23cm)  | 
   
  
    | Large 
    Half Leg | 
    HL-15 | 
    23.5 in 
    (59 cm) | 
    11 in (28 
    cm)  | 
   
 
How to Measure for the  Dry Pro Waterproof Cast Cover / Shower Bag
1) MEASURE LENGTH  
LEG: Measure from the back of the heel (from the floor) to the 
top end of the cast or prosthetic. 
Choose a Dry Pro waterproof cast cover that is at least 2 
inches LONGER than your measurement. 
Don't worry if the Dry Pro Pro-Pump waterproof cast cover is 
too long. The excess material of the cast sock will flatten down when the air is 
pumped out. 
  
2) MEASURE OPENING  
LEG: Measure the circumference of the leg just above the cast 
or bandage (If the end of the cast is very close to the knee, measure mid 
thigh.)  
Choose a Dry Pro waterproof cast cover that is at least 1 inch 
SMALLER than your measurement. 
To create a good vacuum seal the 
opening of the cast sock needs to be smaller than your limb. 
  
Arm Cast Cover Sizes  
(The arm models have a different shape than the leg models)
  
    | 
    Arm Cast 
    Cover Style | 
    
    Model | 
    
    Length 
    in(cm)  | 
    
    Opening 
    in(cm)  | 
   
  
    | 
    X-Small | 
    FA-12 | 
    16 in (40 cm) | 
    5.75 in 
    (15 cm)  | 
   
  
    | Small | 
    FA-14 | 
    23 in (58 
    cm) | 
    6 in (15 
    cm)  | 
   
  
    | Medium | 
    FA-16 | 
    28 in (71 cm) | 
    7.75 in 
    (20 cm)  | 
   
  
    | Large | 
    FA-18 | 
    31.5 in 
    (80 
    cm) | 
    9 in (22 
    cm)  | 
   
  
    | Small 
    Half Arm | 
    HA-13 | 
    17.25 in 
    (43cm) | 
    7.25 in 
    (18cm)  | 
   
  
    | Large 
    Half Arm | 
    HA-15 | 
    20 in 
    (51 cm) | 
    8.75 in (22 
    cm)  | 
   
 
How to Measure for the  Dry Pro Waterproof Cast Cover / Shower Bag
1) MEASURE 
LENGTH  
ARM: Measure 
from the tip of the middle finger to the top end of the cast or prosthetic. If 
the cast goes above the elbow, follow the bend of the arm. 
Don't worry if the Dry Pro Pro-Pump waterproof cast cover is 
too long. The excess material of the cast sock will flatten down when the air is 
pumped out. 
2) MEASURE 
OPENING  
ARM: Measure 
the circumference of the arm just above the cast or bandage (If the end of the 
cast is very close to the elbow, measure mid bicep.)  
Choose a Dry Pro waterproof cast cover that is at least 1 inch 
SMALLER than your measurement. 
To create a good vacuum seal the 
opening of the cast sock needs to be smaller than your limb. 
 
 
  
    | 
    Low Cost Shipping:   Products on this page are 
    shipped "flat rate" S&H in USA.  "Flat rate" means one price, no matter 
    how much you order. | 
    
  | 
    
    30 Day Money Back Guarantee 
    (on unused merchandise) | 
   
   
For sale for only $33.95 to $36.95 
(depending on model and size). 
To Order,
click this link:
Dry Pro 
Models available for leg and arm. 
  
Instructions on How to Use the  Dry Pro Waterproof Cast Cover 
/ Shower Bag
  
    | 
    1. Slide on  Dry Pro 
    - Stretch on the  
    Dry Pro 
    waterproof bandage cover so that it completely covers the cast or bandage 
    plus an additional inch. The top should be smooth against the skin. Be 
    careful of sharp objects. A fingernail, sharp fiberglass threads on a cast, 
    can rip the  Dry Pro cast and bandage protector. Putting a soft ace 
    bandage or a tube sock with the toe cut out over the fiberglass cast will 
    help reduce sharp fiberglass threads from cutting into the  
    Dry Pro 
    waterproof bandage cover. | 
      | 
   
  
    | 
    2. Pump out the air - Continue to press the bulb 
    until it remains flat and the  Dry Pro waterproof clothing is completely 
    wrinkled. Remove the pump and push on the safety cap. Observe the  
    Dry Pro 
    waterproof cast and bandage cover for a few minutes before going in the 
    water. As long as the  Dry Pro waterproof clothing stays collapsed and 
    wrinkled, the vacuum is intact and the  Dry Pro bandage protector cannot leak 
    or come off. | 
    
      | 
   
  
    | 
    3. Slide off - When you are done using the  
    Dry Pro 
    waterproof clothing, simply lift up the cuff to let the air back in. The 
     
    Dry Pro waterproof bandage cover should now be loose. Simply slide it back 
    off.    | 
      | 
   
  
    | 
    Note - Do not leave on for extended periods of time. We recommend 
    removing it after every 45 minutes of use. Do not use in vascular 
    compromised patients. Steady yourself in wet slippery areas. The  
    Dry Pro 
    cast and bandage protector contains natural rubber latex, which may cause 
    allergic reactions. Always follow your doctor's advice. | 
      | 
   
   
 
Frequently Asked Questions about the  Dry Pro Waterproof Cast Cover / 
Shower Bag
How water resistant is the Dry Pro?  
The Dry Pro is TOTALLY WATERPROOF. Because of it's patented vacuum seal, the 
Dry Pro will keep your cast or bandage completely dry. At any time, you can 
easily check the vacuum seal by simply seeing a dimple in the ProPump. With the 
Dry Pro you can "SEE AND FEEL THE SEAL!"  
What activities can I do while wearing the Dry Pro?  
You can go swimming, go to the beach, bathe, shower, or have hydrotherapy. 
The Dry Pro is TOTALLY WATERPROOF. Because of its patented vacuum seal, the 
Dry Pro will keep your cast or bandage completely dry. At any time, you can 
easily check the vacuum seal by simply seeing a dimple in the Pro-Pump. With the 
Dry Pro you can "SEE AND FEEL THE SEAL"!  
Is the Dry Pro easy to use?  
Yes. The Dry Pro is as easy to use as 1-2-3.  1)Slide the Dry Pro over your 
arm or leg.  2)Pump the air out by simply squeezing the built in pump.  3)Enjoy the 
water; a long, warm, comfortable bath or a refreshing swim.  
What makes the Dry Pro so special?  
The Dry Pro is the only truly waterproof protector in the world. The leg has 
a special non-skid grid sole, perfect for showering. The flexible latex is 
natural and very comfortable.  
What sizes does the Dry Pro come in?  
The Dry Pro will fit almost everyone! The Dry Pro comes in sizes from 
X-Small for 2 year olds to X-Large for people 6 1/2 feet tall. (See the choosing 
a size section for further information).  
Is the Dry Pro durable?  
The Dry Pro is extremely durable. It is made of thick surgical latex and can 
stretch up to 1000 percent of it's original size before rupturing.  
 
  |